with reliability and simplicity
Based on decades of experience in industrial metrology, the provider of the most accurate scanner in the dental market – Imetric 3D SA – has developed a new series of fast, affordable and accurate scanning systems for use in the dental laboratory.
The IScan L1 is the scanner for standard indications like crowns and bridges, partials, dentures, inlays/onlays etc.
Important: It can be upgraded to the version L1m, which is also capable of scanning implant models for the production of custom abutments and multi-implant restorations, in addition to the afore mentioned standard indications.
Thanks to a proprietary and advanced calibration technique, the IScan L1i offers ultimate precision. It is therefore also suited for the digitization of multi-implant models, allowing the production of passive fitting, large-span, screw-retained structures.
|Technology||Heterodyne phase shift-based structured white light|
combined with photogrammetry
|Scan volume||Diameter 110 mm, up to 80 mm height|
|Scan speed||Single die: Approx. 30 sec|
9 dies (in multi-die): Approx. 30 sec
Full arch model: Approx. 30 sec
|Two cameras, 1.3 Mega pixels|
|< 5 μm (depending on surface of object)|
< 10 μm (depending on surface of object)
< 15 μm over complete arch
L1i only: < 5 μm for implant positions scanned with
Imetric certified scan adapters
|Scan indications||L1: Impressions, dental models and check-bites -|
standard indications, such as crowns and bridges,
partials, dentures, inlays/onlays etc.
L1m: In addition to L1, implant models for the
production of custom abutments and multi-implant
L1i: In addition to L1m, high-accurancy
determination of implant positions and orientation
with scan adapters.
|Dimensions||29 cm x 36 cm x 52 cm (width x depth x height)|
|Calibration||Fully automated calibration method|
L1i only: Proprietary calibration technique for
|Data output||Binary STL, Implant positions in XML|
|Power requirements||100-240 V AC, 50-60 Hz, 2A|
|Open output formats||Open file output for exporting to multiple dental|
Integrated workflow for exocad.
Output formats: STL, texture obj, texture ply,
texture wrz (for integration with Digistell),
and xml (for implant positions).
Highest precision for implant-based restorations
Since a passive fit is specifically important for implant-based restorations, Imetric has developed special implant positioning methods. They are used in combination with metallic scan adapters, high-precision pieces with very tight tolerances of less than 5 μm.
In order to ensure that the accuracy of the IScan L1i for multi-implant restorations is similar to that of coordinate measurement machines, special testing methods are employed. For most accurate data transfer, implant positions are supplied as XML file. Proprietary calibration techniques, supervision of the calibration status, and temperature supervision during scanning are used.
|Scanner Accessories for L1 Series|
|Model holder with 4 holding screws||Included|
|Antagonist clamp - column and spring||Included|
|Multi-die for up to 9 dies||Included|
|Smart model plate 120mm||Included|
|Universal plate 180mm||Included|
|Calibration Plate (CP)||Included|
|Calibration Plate Support||Included|
|Product Name||L2 Scanning System|
|Use||For Scanning of Models|
|Warranty / Guarantee||1 Year|
|Shipping Time||10-15 Working Days|
|Payment Mode||Credit Card, Debit Card, Net Banking, Wallets, Cash on Delivery|
- Stock: In Stock
- Model: L2 Scanning System