IPS e.max Ceram Selection Kit Ivoclar-Vivadent Rs.23,660.71 by Dental Trade Mart

Description:

Low-fusing nano-fluor-apatite glass ceramic used to veneer and characterise restorations manufactured using the press- and/or CAD/CAM technology. Due to the optimised combination of low firing temperature (730 °C) and a CTE of 9.5 x 10⁻⁶K⁻¹ (100-400 °C) the material is suitable for lithium disilicate glass ceramic and ZrO₂.

Advantages:

One layering porcelain for lithium disilicate glass ceramic and ZrO₂;

Precise colour matching and the same clinical behaviour – regardless of the frame;

Nano-fluor-apatite for highly aesthetic properties;

High light conductivity with higher fluorescence at the same time.

Indications:

Characterisation and veneering of restorations made of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD und IPS ZirCAD;

Characterisation and veneering of ZrO₂ frames in the CTE range 10.5 to 11.0 x 10⁻⁶K⁻¹ (25-500 °C);

Layered veneers on refractory die material;

Shaping of gingival areas of restorations made from IPS e.max ZirCAD and IPS e.max ZirPress.

Physical data:

CTE 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400 °C); firing temperature 730 °C (1st dentine); flexural strength (biaxial) ≥ 50 N/mm²; chemical solubility < 100 µg/cm².

Selection kit:

6 Selection special enamel (aqua, citrine, honey, apricot, quartz, diamond) 5 g each;

3 Selection light reflector (cream, salmon, silk) 5 g each;

3 Selection light absorber (fog, lavender, taupe) 5 g each.

Alias : Dental ceramic, ceramics, ivoclar, ivoclar ceramic powder, ivoclar-vivadent ceramic powder, porcelain, crowns, PFM crown, ivoclar vivadent ceramic, ivoclar e.max ceram, ips e.max selection kit, ceramic material, ceramic selection kit, e.max ceram powder, e.max, ivoclar-vivadent.