First ' peelable ' silicone based temporary luting cement
THE ALLROUNDER CEMENT
The temporary A-silicone-cement TempoSIL 2 guarantees optimal adhesion on different surfaces as well as superior marginal integrity. The ideally balanced elasticity of the TempoSIL 2 formulation ensures for trouble-free removal of excess temporary cement. For esthetic applications, TempoSIL 2 is available in 2 different shades: white and dentin.
- Secure adhesion of provisional restorations to natural tooth structure, core build up material and metal alloys as well as zirconia
- Simple application as well as easy removal
- Fast setting time
- Two shades for esthetic applications
- Superior marginal integrity
Indications
- Temporary cementation of provisional restorations
- Temporary cementation of provisional restorations on implant abutments
- Temporary cementation of final crowns and bridges
- Temporary cementation of final crowns and bridges on implant abutments
Clinical Time
- Automix
- Working Time ≤ 0:50 min
- Setting Time ≥ 2:00 min
Application
1. Gently dry the prepared tooth surface by using oil-free compressed air. Do not overdry. The best results will be achieved, when the prepared tooth surface looks moist (shiny).
2. Cleanse and dry the inside of the restoration..
3. Remove the syringe plug on the syringe and discard.
4. Extrude a small amount of material directly out of the syringe onto a paper towel/tissue until it is evident that base and catalyst are being ejected. This ensures proper mixing.
5. Immediately wipe the syringe orifice to remove excess material.
6. Attach the Mixing Tip to the syringe by aligning the prongs inside the Mixing Tip with the syringe orifice. Seat onto the syringe and twist clockwise (90°) to lock in place.
7. Apply TempoSIL 2 directly from the syringe into the provisional. Seat the provisional, applying slight pressure. Secure undisturbed for 30–60s.
8. After setting, remove the excess material (e.g. scaler).
9. After syringe use, disinfect used Mixing Tip and store the syringe with the used Mixing Tip attached.
Important
Always wear gloves. Skin secretions, latex gloves and surfaces contaminated by latex gloves may interfere with the setting process of A-Silicones. Touch material and the preparation with thoroughly washed and rinsed hands (wash for 15 s with a detergent, rinse with water for another 15 s) or use latex-free gloves. Compounds containing eugenol, hemostatic agents or some anaesthetics may also impede setting. High temperatures accelerate and low temperatures decelerate the setting process.
Packaging: Pack of 2x5ml automix sygs. and 20 mixing tips
| Product | |
| Nature | Luting Cement |
| Condition | Brand New |
| Warranty / Guarantee | 100% Original Guarantee |
| Shipping Time | 2-3 Working Days |
| Payment Mode | Bank Transfer, Credit Card, Debit Card, Net Banking, COD |
